How to Connect Usb Tethering in Windows Xp
Download Article
Download Article
Microsoft Internet Connection Sharing enables a computer connected to the Internet via a cable or DSL modem to share its connection with other computers connected to it.
-
1
Click Start, and then click Control Panel.
-
2
Click Network and Internet Connections, Click Network Connections.
Advertisement
-
3
Right-click the connection that you use to connect to the Internet. For example, if you connect to the Internet by using a modem, right-click the connection that you want under Dial-up.
-
4
Click Properties. Click the Advanced tab.
-
5
Under Internet Connection Sharing, select the Allow other network users to connect through this computer's Internet connection check box.
-
6
If you are sharing a dial-up Internet connection, select the Establish a dial-up connection whenever a computer on my network attempts to access the Internet check box if you want to permit your computer to automatically connect to the Internet.
-
7
Click OK. You receive a message, Click Yes.
Advertisement
-
1
Click Start, and then click Control Panel. Click Network and Internet Connections. Click Network Connections.
-
2
Right-click Local Area Connection, and then click Properties.
-
3
Click the General tab, click Internet Protocol (TCP/IP) in the This connection uses the following items list, and then click Properties.
-
4
In the Internet Protocol (TCP/IP) Properties dialog box, click Obtain an IP address automatically (if it is not already selected), and then click OK.
-
5
In the Local Area Connection Properties dialog box, click OK.
-
6
Open your browser to check, if what you did works.
Advertisement
Add New Question
-
Question
How do I connect internet from mobile to Windows Ultimate via Wi-Fi?
You can use your phone as a Wi-Fi hotspot. Go to the settings on your phone and find an option named: Tethering & Portable hotspot. Then you can use one of the options: Wi-Fi, Bluetooth, and USB Tethering. You will need to connect your phone to your PC with a USB cable first if you use the USB option.
-
Question
How to connect to wired WiFi connection?
AmongUsIsC00l
Community Answer
Get an ethernet cable, then, plug one end into the router, and the other end in the computer. If your ethernet connection is not recognized, make sure the driver is installed.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
-
If you are using a cable, the computer that is sharing connection should have two LAN slots.
-
The connection to the Internet is shared to other computers on the local area network (LAN). The network adapter that is connected to the LAN is configured with a static IP address of 192.168.0.1 and a subnet mask of 255.255.255.0
-
You can also assign a unique static IP address in the range of 192.168.0.2 to 192.168.0.254. For example, you can assign the following static IP address, subnet mask, and default gateway:
- IP Address 192.168.0.2
- Subnet mask 255.255.255.0
- Default gateway 192.168.0.1
Thanks for submitting a tip for review!
Advertisement
About This Article
Thanks to all authors for creating a page that has been read 182,975 times.
Is this article up to date?
How to Connect Usb Tethering in Windows Xp
Source: https://www.wikihow.com/Set-Up-Internet-Connection-Sharing-for-Windows-XP
0 Response to "How to Connect Usb Tethering in Windows Xp"
Post a Comment